There are 3 versions of the Delta Dore radio receiver.
The very old version can only be operated on X2D.
To find out which mode the radio receiver is in or to change the mode, proceed as follows:
Previous version radio receiver X2D/X3D
- To change the mode, reset the receiver (press and hold the button for 30 seconds).
- Power up: Takes a little more time until the lights flash either 2x or 3x.
- After power is applied, immediately press the button 4x to change the mode.
New radio receiver X2D/X3D
- To change the mode, reset the receiver (press and hold the button for 30 seconds).
- Power on: the light immediately flashes either 2x or 3x. This process is then repeated continuously.
- Press the button once (does not have to be done immediately after the power is supplied).
- The receiver switches to the other mode. Press and hold for 3 seconds to confirm mode. Mode has been confirmed. Then confirm again for 3 seconds.